BMW G90 G99 M5 M5 Touring MH Style Real Carbon Fiber Front Bumper Lip Splitter Kit 2025-2026

Upgrade the front-end appearance of your 2025-2026 BMW G90 M5 Sedan or G99 M5 Touring with this MH Style Real Carbon Fiber Front Bumper Lip Splitter Kit. Designed for the latest BMW M5 generation, this three-piece exterior upgrade combines an aggressive center lower lip with matching front bumper corner splitters for a distinctive motorsport-inspired appearance.

Constructed from genuine lightweight 3K carbon fiber, the splitter kit features a glossy UV-protective clear-coated finish that highlights the natural carbon fiber weave. The visible surfaces are clear-coated for added protection against fading, while the hidden rear surfaces retain their uncoated carbon fiber appearance. The sculpted MH Style design enhances the front bumper's lower profile and complements the original BMW M5 exterior styling.

Designed as a direct add-on for compatible BMW G90 and G99 factory front bumpers, the kit includes pre-applied double-sided adhesive tape and pre-drilled mounting holes. Installation uses existing factory mounting locations and original bolts or clips, without additional drilling. Professional installation is recommended to ensure precise alignment, secure attachment, and adequate ground clearance.

Product Specifications

Key Features

• Designed for compatible 2025-2026 BMW G90 M5 Sedan and G99 M5 Touring models
• Distinctive MH Style front bumper lip splitter design
• Three-piece kit with a center lower lip and matching corner splitters
• Genuine lightweight 3K carbon fiber construction
• Glossy UV-protective clear-coated visible surfaces
• Natural uncoated carbon fiber finish on hidden rear surfaces
• Enhances the lower front bumper with an aggressive performance-inspired appearance
• Designed to complement the original BMW M5 front bumper
• Pre-applied double-sided mounting tape
• Pre-drilled mounting holes
• Reuses compatible factory bolts and push clips
• No additional drilling required

Configuration Options

• BMW G90 M5: Compatible 2025-2026 M5 Sedan models with the original matching front bumper.
• BMW G99 M5 Touring: Advertised for compatible 2025-2026 M5 Touring models; verify bumper mounting geometry before ordering.
• Design: MH Style three-piece front bumper splitter kit.
• Material: Genuine 3K carbon fiber.
• Finish: Glossy UV-protective clear coat.
• Installation: Pre-applied adhesive tape and reuse of compatible factory fasteners.

Package Includes

• 1 x MH Style Real Carbon Fiber Center Front Bumper Lower Lip
• 1 x Left MH Style Real Carbon Fiber Front Bumper Corner Splitter
• 1 x Right MH Style Real Carbon Fiber Front Bumper Corner Splitter
• Pre-applied double-sided adhesive tape

Note: Designed for compatible 2025-2026 BMW G90 M5 Sedan and G99 M5 Touring vehicles with the matching original front bumper. This is an add-on splitter kit, not a complete front bumper replacement. The visible carbon fiber surfaces are protected by a glossy UV-resistant clear coat, while the hidden rear surfaces are not clear-coated. The splitter components have pre-drilled mounting holes and pre-applied double-sided tape. No additional drilling is specified. Original factory bolts and push clips must be reused, even though mounting hardware is listed as included. Installation instructions are not included. Verify the original front bumper design, mounting points, and ground clearance before ordering. Professional installation is strongly recommended. Test fitting is recommended before final installation.

Installation

• Confirm the vehicle is a compatible BMW G90 M5 or G99 M5 Touring with the original matching front bumper.
• Safely raise the front of the vehicle or use a suitable automotive lift for access to the lower bumper mounting points.
• Clean and inspect the original front bumper mounting surfaces.
• Identify the center lower lip and left and right corner splitter components.
• Test fit all three pieces against the factory front bumper.
• Verify alignment of the pre-drilled mounting holes with the original mounting locations.
• Remove and retain the appropriate factory bolts and push clips.
• Remove the protective backing from the pre-applied double-sided adhesive tape.
• Position the splitter components and align them with the bumper contours.
• Secure the components using the appropriate original factory fasteners and compatible hardware.
• Apply firm pressure along adhesive contact areas and follow the adhesive manufacturer's curing guidance.
• Check alignment, secure attachment, and available front ground clearance.
• No additional drilling is required according to the specified installation method.
• Professional installation is strongly recommended.
• Test fitting is recommended before final installation.

Fitment

• 2025-2026 BMW G90 M5 Sedan with compatible factory front bumper
• 2025-2026 BMW G99 M5 Touring with compatible factory front bumper, subject to mounting verification
• Designed for the original BMW M5 lower front bumper configuration
• Not listed for standard BMW G60 5 Series or G61 5 Series Touring models
• Verify factory front bumper geometry and mounting compatibility before ordering

United States: Free shipping available to the lower 48 states across all items. Other states will incur a shipping charge.

Worldwide: Free shipping is available for Complete Headlights, Taillights, DRLs. For custom headlight retrofits, carbon fiber products, and performance products, there will be a shipping charge.  

Please note:
• For Retrofits, you are purchasing a headlight modification service.
• If you select "Shipping own headlights to BayOptiks for modification", you are required to send us your headlights.
• If you choose "Purchase new OEM headlights", we will order and modify a new OEM headlight for you.
• Once your customizations are complete, we will ship it to you!

• Complete Headlights: 3-5 business days for order processing plus shipping time.
• Custom Retrofits & Pre-Built Headlights: 6-8 weeks depending on the complexity and component availability.
• New OEM and cores: 6-8 weeks plus an additional 4-8 weeks as these are special orders base on the vehicle VIN due to different versions (North American, European, etc.)
• DRLs, Taillights, Brake Pads, and Carbon Fiber Aero: 3-5 business days for order processing, plus shipping time.
• Lens Replacements: 1-2 weeks plus shipping time.

Please note, we do not have control over the time frames of our vendors, manufacturers, and delivery services as they may delay processes in regards to components and shipment.