BMW G80 G82 G83 M3 M4 VT Style Real Carbon Fiber Front Bumper Lip Splitter Kit 2021-2026

Upgrade the front-end appearance of your 2021-2026 BMW G80 M3 or G82/G83 M4 with this VT Style Real Carbon Fiber Front Bumper Lip Splitter Kit. Featuring an aggressive three-piece design with CSL-style corner splitters and a center lower lip, this exterior upgrade adds a distinctive motorsport-inspired appearance to the original BMW M front bumper.

Constructed from 100% genuine carbon fiber, the splitter kit features a premium 3K carbon fiber weave with a hard UV-protected clear-coated finish. Unlike carbon-look paint or hydro-dipped plastic, these components use real carbon fiber material for a lightweight, durable construction. The sculpted VT Style design creates a more pronounced front profile while complementing the factory kidney grille and lower bumper contours.

Designed for compatible BMW G80 M3 Sedans, G82 M4 Coupes, and G83 M4 Convertibles, this three-piece kit includes two replacement front bumper corner splitters and one center lower lip. The corner splitters replace the original factory black components and use existing OEM mounting locations. Installation also requires drilling, with additional double-sided automotive adhesive tape recommended for reinforcement. Professional installation is strongly recommended.

Product Specifications

Key Features

• Designed for compatible 2021-2026 BMW G80 M3 and G82/G83 M4 models
• Aggressive VT Style three-piece front bumper lip design
• CSL-inspired replacement corner splitters
• Pronounced center lower lip for enhanced front-end styling
• 100% genuine real carbon fiber construction
• Premium 3K carbon fiber weave pattern
• Hard UV-protected clear-coated finish
• Lightweight carbon fiber material rather than painted or hydro-dipped plastic
• Uses compatible OEM mounting locations
• Replacement corner splitters integrate with the original bumper design
• Mounting hardware included
• Drilling required for installation

Configuration Options

• BMW G80 M3: Compatible 2021-2026 M3 Sedan models with the matching original front bumper.
• BMW G82 M4: Compatible 2021-2026 M4 Coupe models with the matching original front bumper.
• BMW G83 M4: Compatible 2022-2026 M4 Convertible models with the matching original front bumper.
• Design: VT Style front bumper lip with CSL-style corner splitters.
• Material: Genuine 3K weave carbon fiber.
• Finish: UV-protected clear-coated carbon fiber.

Package Includes

• 1 x VT Style Real Carbon Fiber Center Front Bumper Lower Lip
• 1 x Left CSL-Style Real Carbon Fiber Front Bumper Corner Splitter
• 1 x Right CSL-Style Real Carbon Fiber Front Bumper Corner Splitter
• Mounting hardware

Note: Designed for compatible BMW G80 M3 Sedan, G82 M4 Coupe, and G83 M4 Convertible models with matching original front bumper configurations. The two side components replace the original factory black corner splitters, while the center lip adds an aggressive lower bumper extension. Removal of the original corner splitters is required. Installation requires drilling, and additional automotive-grade double-sided adhesive tape is recommended for secure mounting. Front bumper removal is also recommended for proper fitment. Although mounting hardware is included, the exact fastener assortment and adhesive tape inclusion are not specified. Installation instructions are not included. Verify bumper compatibility and available ground clearance before ordering. Professional installation is strongly recommended. Test fitting is recommended before final installation.

Installation

• Confirm compatibility with the BMW G80 M3 or G82/G83 M4 factory front bumper.
• Inspect the original front bumper corner splitters and lower mounting surfaces.
• Remove the original factory black front corner splitters.
• Front bumper removal is recommended to provide better access to the original mounting points.
• Identify the left and right carbon fiber replacement corner splitters and the center lower lip.
• Test fit all three pieces against the bumper before drilling or final attachment.
• Install the replacement corner splitters using compatible OEM mounting locations.
• Position the center lower lip and identify the required mounting points.
• Drill the necessary mounting holes using appropriate tools and installation procedures.
• Secure all components using suitable mounting hardware and compatible fasteners.
• Use additional automotive-grade double-sided adhesive tape where appropriate for extra mounting support.
• Check alignment, front ground clearance, and secure attachment of all three pieces.
• Professional installation by an experienced automotive body shop is strongly recommended.
• Test fitting is recommended before final installation.

Fitment

• 2021-2026 BMW G80 M3 Sedan with compatible original front bumper
• 2021-2026 BMW G82 M4 Coupe with compatible original front bumper
• 2022-2026 BMW G83 M4 Convertible with compatible original front bumper
• Compatible Base and Competition configurations with matching factory bumper mounting points
• Selected xDrive configurations with compatible factory front bumper components
• Not listed for standard BMW G20 3 Series or G22/G23 4 Series models
• Original factory front corner splitters must be removed before installation
• Confirm bumper design, mounting locations, and ground clearance before ordering

United States: Free shipping available to the lower 48 states across all items. Other states will incur a shipping charge.

Worldwide: Free shipping is available for Complete Headlights, Taillights, DRLs. For custom headlight retrofits, carbon fiber products, and performance products, there will be a shipping charge.  

Please note:
• For Retrofits, you are purchasing a headlight modification service.
• If you select "Shipping own headlights to BayOptiks for modification", you are required to send us your headlights.
• If you choose "Purchase new OEM headlights", we will order and modify a new OEM headlight for you.
• Once your customizations are complete, we will ship it to you!

• Complete Headlights: 3-5 business days for order processing plus shipping time.
• Custom Retrofits & Pre-Built Headlights: 6-8 weeks depending on the complexity and component availability.
• New OEM and cores: 6-8 weeks plus an additional 4-8 weeks as these are special orders base on the vehicle VIN due to different versions (North American, European, etc.)
• DRLs, Taillights, Brake Pads, and Carbon Fiber Aero: 3-5 business days for order processing, plus shipping time.
• Lens Replacements: 1-2 weeks plus shipping time.

Please note, we do not have control over the time frames of our vendors, manufacturers, and delivery services as they may delay processes in regards to components and shipment.