BMW G30 5 Series 530i 540i M550i FD Style Real Carbon Fiber Front Bumper Lip Splitter Kit 2021-2023

Upgrade the front-end appearance of your 2021-2023 BMW G30 5 Series with this FD Style Real Carbon Fiber Front Bumper Lip Splitter Kit. Designed for compatible facelift BMW 530i, 540i, and M550i Sedan models with the appropriate M Sport front bumper, this three-piece exterior upgrade enhances the lower front fascia with an aggressive, performance-inspired appearance.

Constructed from genuine lightweight carbon fiber, the splitter kit features a glossy UV-protective clear coat that highlights the natural carbon fiber weave. Unlike painted carbon-look plastic or hydro-dipped finishes, these components are made from real carbon fiber. The FD Style design combines a center lower lip with matching left and right side splitters to create a coordinated front-end appearance.

Designed as an add-on to the compatible factory front bumper, this three-piece kit requires drilling through the front lip components and bumper for secure installation. Automotive-grade double-sided adhesive tape is recommended for additional mounting support, and some original factory clips or bolts may need to be reused. Professional installation is strongly recommended to ensure correct alignment, secure mounting, and sufficient ground clearance.

Product Specifications

Key Features

• Designed for compatible 2021-2023 BMW G30 5 Series LCI models
• FD Style aggressive front bumper lip design
• Three-piece configuration with center lip and matching side splitters
• Genuine lightweight carbon fiber construction
• Glossy UV-protective clear-coated finish
• Authentic carbon fiber material rather than painted or hydro-dipped plastic
• Enhances the original lower front bumper with sportier styling
• Designed for vehicles with the compatible M Sport front bumper
• Mounting hardware included
• Drilling required for secure installation
• Additional automotive-grade adhesive tape recommended

Configuration Options

• BMW G30 530i: Compatible 2021-2023 LCI Sedan models with the M Sport front bumper.
• BMW G30 540i: Compatible 2021-2023 LCI Sedan models with the M Sport front bumper.
• BMW G30 M550i xDrive: Compatible 2021-2023 LCI Sedan models with the matching original front bumper.
• BMW G30 530e: Compatible 2021-2023 LCI Sedan models with the M Sport front bumper.
• Design: FD Style three-piece front bumper lip splitter.
• Material: Genuine carbon fiber.
• Finish: Glossy UV-protective clear coat.

Package Includes

• 1 x FD Style Real Carbon Fiber Center Front Bumper Lip
• 1 x Left Real Carbon Fiber Front Bumper Side Splitter
• 1 x Right Real Carbon Fiber Front Bumper Side Splitter
• Mounting hardware

Note: Designed for compatible 2021-2023 BMW G30 5 Series LCI models with the matching M Sport front bumper, including applicable 530i, 540i, 530e, and M550i configurations. Not compatible with standard non-M Sport front bumpers or pre-facelift bumper designs. The kit is made from real carbon fiber; prepreg or dry carbon fiber construction is not specified. Installation requires drilling through both the lip components and original bumper. Double-sided automotive adhesive tape is recommended for additional support, and some original clips or bolts may need to be reused. The exact hardware assortment and adhesive tape inclusion are not confirmed. Installation instructions are not included. Verify the original bumper shape, mounting locations, and available ground clearance before ordering. Professional installation is strongly recommended. Test fitting is recommended before final installation.

Installation

• Confirm the vehicle has a compatible BMW G30 LCI M Sport front bumper.
• Safely raise the front of the vehicle or use a suitable automotive lift for access.
• Clean and inspect the original lower front bumper mounting surfaces.
• Identify the center front lip and left and right side splitters.
• Position all three components against the bumper and perform a test fit.
• Adjust the angle and alignment of each section to achieve the intended fit.
• Mark the required mounting holes on the lip components and front bumper.
• Drill the necessary holes using suitable tools and proper installation procedures.
• Position and secure the three components using appropriate mechanical fasteners.
• Reuse compatible factory clips or bolts where necessary.
• Apply automotive-grade double-sided adhesive tape where appropriate for additional support.
• Verify secure attachment, consistent alignment, and adequate ground clearance.
• Professional installation is strongly recommended.
• Test fitting is recommended before final installation.

Fitment

• 2021-2023 BMW G30 530i Sedan with M Sport front bumper
• 2021-2023 BMW G30 530i xDrive Sedan with M Sport front bumper
• 2021-2023 BMW G30 540i Sedan with M Sport front bumper
• 2021-2023 BMW G30 540i xDrive Sedan with M Sport front bumper
• 2021-2023 BMW G30 530e Sedan with M Sport front bumper
• 2021-2023 BMW G30 530e xDrive Sedan with M Sport front bumper
• 2021-2023 BMW G30 M550i xDrive Sedan with compatible original front bumper
• Designed for LCI facelift front bumper configurations
• Not compatible with standard non-M Sport front bumpers
• Not intended for pre-LCI front bumper designs
• Confirm original bumper shape and mounting points before ordering

United States: Free shipping available to the lower 48 states across all items. Other states will incur a shipping charge.

Worldwide: Free shipping is available for Complete Headlights, Taillights, DRLs. For custom headlight retrofits, carbon fiber products, and performance products, there will be a shipping charge.  

Please note:
• For Retrofits, you are purchasing a headlight modification service.
• If you select "Shipping own headlights to BayOptiks for modification", you are required to send us your headlights.
• If you choose "Purchase new OEM headlights", we will order and modify a new OEM headlight for you.
• Once your customizations are complete, we will ship it to you!

• Complete Headlights: 3-5 business days for order processing plus shipping time.
• Custom Retrofits & Pre-Built Headlights: 6-8 weeks depending on the complexity and component availability.
• New OEM and cores: 6-8 weeks plus an additional 4-8 weeks as these are special orders base on the vehicle VIN due to different versions (North American, European, etc.)
• DRLs, Taillights, Brake Pads, and Carbon Fiber Aero: 3-5 business days for order processing, plus shipping time.
• Lens Replacements: 1-2 weeks plus shipping time.

Please note, we do not have control over the time frames of our vendors, manufacturers, and delivery services as they may delay processes in regards to components and shipment.