BMW F95 F96 X5 M X6 M Prepreg Dry Carbon Fiber Engine Cover Replacement 2020-2023

Upgrade the engine bay appearance of your 2020-2023 BMW F95 X5 M or F96 X6 M with this Full Prepreg Dry Carbon Fiber Engine Cover Replacement. Designed for compatible pre-facelift BMW M SUVs equipped with the S63B44T4 engine, this premium replacement cover adds genuine carbon fiber styling while maintaining the original engine cover configuration.

Constructed from 100% real prepreg dry carbon fiber, this engine cover features a lightweight full carbon fiber structure rather than carbon-look paint, hydro-dipped plastic, or an adhesive overlay. The visible exterior surface is finished with a glossy UV-resistant clear coat that highlights the natural carbon fiber weave, while the hidden rear surface retains its raw, uncoated carbon fiber finish.

Designed to replace the original factory plastic engine cover, this component includes the appropriate badge mounting cutout and pre-drilled prongs for transferring the original BMW badge. The original heat insulation shield must also be removed from the factory cover and transferred to the carbon fiber replacement before installation. No additional modifications are specified, and professional installation is recommended.

Product Specifications

Key Features

• Designed for compatible 2020-2023 BMW F95 X5 M and F96 X6 M models
• Compatible with the BMW S63B44T4 engine configuration
• 100% genuine full prepreg dry carbon fiber construction
• Lightweight carbon fiber structure rather than carbon-look paint or hydro-dipped plastic
• Glossy UV-resistant clear coat on the visible exterior surface
• Raw carbon fiber finish on the hidden rear surface
• Direct replacement for the original decorative plastic engine cover
• Factory-inspired design for an upgraded engine bay appearance
• Pre-drilled badge mounting prongs for reuse of the original BMW badge
• Designed to accommodate transfer of the original heat insulation shield
• No additional modifications specified for compatible vehicles

Configuration Options

• BMW F95 X5 M: Compatible 2020-2023 pre-facelift models equipped with the S63B44T4 engine.
• BMW F95 X5 M Competition: Compatible 2020-2023 pre-facelift models equipped with the S63B44T4 engine.
• BMW F96 X6 M: Compatible 2020-2023 pre-facelift models equipped with the S63B44T4 engine.
• BMW F96 X6 M Competition: Compatible 2020-2023 pre-facelift models equipped with the S63B44T4 engine.
• Material: Full prepreg dry carbon fiber.
• Finish: Glossy UV-resistant clear coat on visible surfaces.

Package Includes

• 1 x Full Prepreg Dry Carbon Fiber Engine Cover Replacement

Note: Designed for compatible 2020-2023 BMW F95 X5 M and F96 X6 M pre-facelift models with the S63B44T4 engine. This product replaces the original decorative plastic engine cover and does not replace the mechanical engine valve covers. The original BMW badge and heat insulation shield are not included and must be transferred from the factory engine cover. Do not install the carbon fiber replacement without transferring the required original heat insulation shield. Only the visible exterior surface is clear-coated; the hidden rear surface is intentionally uncoated. Verify the original cover shape, engine code, and factory mounting configuration before ordering. Installation instructions are not included. Professional installation is recommended. Test fitting is recommended before final installation.

Installation

• Confirm the vehicle is a compatible 2020-2023 BMW F95 X5 M or F96 X6 M with the S63B44T4 engine.
• Park the vehicle securely, switch off the engine, and allow the engine compartment to cool completely.
• Inspect the original plastic engine cover and its attachment points.
• Carefully remove the original decorative engine cover following the appropriate vehicle service procedure.
• Remove the original BMW badge and retain it for installation on the carbon fiber replacement.
• Carefully remove and retain the factory heat insulation shield from the original cover.
• Transfer the original heat insulation shield to the carbon fiber replacement before installing it on the engine.
• Install the original BMW badge into the provided badge mounting location.
• Test fit the carbon fiber cover against the original engine cover mounting points.
• Secure the replacement cover using the applicable original mounting arrangement.
• Verify that the heat insulation shield is properly installed and that the cover has adequate clearance from surrounding components.
• Check that the cover is firmly attached before operating the vehicle.
• Professional installation is recommended.
• Test fitting is recommended before final installation.

Fitment

• 2020-2023 BMW F95 X5 M SUV with S63B44T4 engine
• 2020-2023 BMW F95 X5 M Competition SUV with S63B44T4 engine
• 2020-2023 BMW F96 X6 M Sports Activity Coupe with S63B44T4 engine
• 2020-2023 BMW F96 X6 M Competition Sports Activity Coupe with S63B44T4 engine
• Designed for compatible pre-LCI factory engine cover configurations
• Not confirmed for 2024 and newer LCI models with the S68 engine
• Not intended for standard G05 X5 or G06 X6 models with other engine configurations
• Verify the original engine cover and factory heat insulation shield before ordering

United States: Free shipping available to the lower 48 states across all items. Other states will incur a shipping charge.

Worldwide: Free shipping is available for Complete Headlights, Taillights, DRLs. For custom headlight retrofits, carbon fiber products, and performance products, there will be a shipping charge.  

Please note:
• For Retrofits, you are purchasing a headlight modification service.
• If you select "Shipping own headlights to BayOptiks for modification", you are required to send us your headlights.
• If you choose "Purchase new OEM headlights", we will order and modify a new OEM headlight for you.
• Once your customizations are complete, we will ship it to you!

• Complete Headlights: 3-5 business days for order processing plus shipping time.
• Custom Retrofits & Pre-Built Headlights: 6-8 weeks depending on the complexity and component availability.
• New OEM and cores: 6-8 weeks plus an additional 4-8 weeks as these are special orders base on the vehicle VIN due to different versions (North American, European, etc.)
• DRLs, Taillights, Brake Pads, and Carbon Fiber Aero: 3-5 business days for order processing, plus shipping time.
• Lens Replacements: 1-2 weeks plus shipping time.

Please note, we do not have control over the time frames of our vendors, manufacturers, and delivery services as they may delay processes in regards to components and shipment.