Audi B10 A5 S5 S Line Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Covers 2025-2026
Audi B10 A5 S5 S Line Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Covers 2025-2026
Audi B10 A5 S5 S Line Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Covers 2025-2026
Audi B10 A5 S5 S Line Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Covers 2025-2026

Audi B10 A5 S5 S Line Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Covers 2025-2026

$304.95 In Stock In Stock Sold out
Select vehicle fitment
Notify when available

3-7 DAYS DELIVERY (NON PRE-ORDER)

100% ORIGINAL & HIGH-QUALITY

1-YEAR WARRANTY

Description

Upgrade the front-end appearance of your 2025-2026 Audi B10 A5 S Line or S5 with these Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Covers. Designed specifically for compatible B10 models, these premium exterior accessories enhance the original front bumper air duct surrounds with an aggressive, performance-inspired carbon fiber appearance.

Constructed from 100% genuine 3K 2x2 prepreg dry carbon fiber, these trim covers feature full carbon fiber construction on both the front and rear surfaces. Unlike carbon-look plastic or hydro-dipped finishes, the lightweight carbon fiber components showcase an authentic woven texture. A glossy UV-resistant clear coat protects the visible surfaces against sunlight and fading, while the sculpted aero-fin styling complements the factory front bumper design.

Designed as direct add-on overlays, the left and right air duct vent trims install over the original front bumper components using pre-applied double-sided adhesive tape. No drilling or permanent modifications are required. Thorough surface preparation and accurate alignment are essential for secure mounting. Professional installation is recommended to ensure proper fitment and long-lasting adhesion.

Product Specifications

Vehicle Make Audi
Models A5 S Line / S5
Chassis B10
Model Years 2025-2026
Body Style Compatible 4-Door Models
Product Type Front Bumper Air Duct Vent Trim Covers
Design Style OE-Inspired Aero Fin Design
Material 100% Prepreg Dry Carbon Fiber
Carbon Fiber Weave 3K 2x2 Weave
Construction Full Carbon Fiber Front and Back Surfaces
Color Black Carbon Fiber
Surface Finish Glossy UV-Protective Clear Coat
Installation Position Left and Right Front Bumper Air Duct Surrounds
Fitment Type Direct Add-On Overlay
Attachment Method Pre-Applied Double-Sided Adhesive Tape
Drilling Required No
Original Vent Removal Not Required
Vehicle Modification Required No
Installation Instructions Not Included
Package Quantity 2 Pieces / 1 Pair

Key Features

  • Designed for compatible 2025-2026 Audi B10 S5 and A5 S Line models
  • 100% genuine 3K 2x2 prepreg dry carbon fiber construction
  • Full carbon fiber material on both front and rear surfaces
  • Lightweight and durable construction with an authentic carbon fiber weave
  • Glossy UV-resistant clear-coated finish
  • OE-inspired aero fin styling for a more aggressive front bumper appearance
  • Designed to cover the original front bumper air duct vent surrounds
  • Complete left and right trim pair
  • Pre-applied double-sided adhesive tape for installation
  • No drilling or permanent modifications required
  • Direct add-on fitment without removing the original vent trim

Configuration Options

  • Audi B10 A5 S Line: Compatible 2025-2026 models with the matching S Line front bumper air duct design.
  • Audi B10 S5: Compatible 2025-2026 models with the matching original front bumper air duct design.
  • Material: Full prepreg dry carbon fiber with 3K 2x2 weave.
  • Finish: Glossy UV-protective clear coat.
  • Installation: Pre-applied double-sided adhesive tape over original bumper trim.

Package Includes

  • 1 x Left Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Cover
  • 1 x Right Prepreg Dry Carbon Fiber Front Bumper Air Duct Vent Trim Cover
  • Pre-applied double-sided adhesive tape on both trim covers

Note: Designed for compatible 2025-2026 Audi B10 S5 models and Audi B10 A5 models equipped with the S Line front bumper. Not compatible with non-S Line A5 front bumpers or 2-door Coupe configurations. These components are add-on overlays that mount over the original air duct vent surrounds, not complete replacement bumper vents. The included adhesive is pre-applied; proper cleaning and preparation of the original surfaces are essential for secure adhesion. Installation instructions are not included. Verify the vehicle's front bumper design and vent trim shape before ordering. Professional installation is recommended. Test fitting is recommended before final installation.

Installation

  • Confirm the vehicle is a compatible 2025-2026 Audi B10 S5 or A5 S Line.
  • Inspect the original left and right front bumper air duct surrounds.
  • Clean the mounting surfaces thoroughly using rubbing alcohol to remove dirt, wax, oil, and residue.
  • Allow the surfaces to dry completely before installation.
  • Identify the left and right carbon fiber trim covers.
  • Test fit each cover against its matching factory vent surround.
  • Verify alignment and clearance around the original vent openings.
  • Remove the protective backing from the pre-applied double-sided adhesive tape.
  • Carefully position each trim cover over its corresponding factory component.
  • Apply firm, even pressure along the adhesive contact surfaces.
  • Allow the adhesive to develop full bond strength according to the adhesive manufacturer's instructions.
  • Verify both trim covers are securely attached before driving.
  • No drilling or removal of the original vents is required.
  • Professional installation is recommended.
  • Test fitting is recommended before final installation.

Fitment

  • 2025-2026 Audi B10 A5 S Line with compatible front bumper air duct surrounds
  • 2025-2026 Audi B10 S5 with compatible front bumper air duct surrounds
  • Designed for compatible B10 four-door body configurations
  • A5 models must have the S Line front bumper design
  • Not compatible with non-S Line A5 models
  • Not compatible with 2-door Coupe configurations
  • Not listed for previous-generation Audi B9 or B9.5 A5/S5 models
  • Confirm the front bumper and original vent surround design before ordering

Shipping Policy

United States: Free shipping available to the lower 48 states across all items. Other states will incur a shipping charge.

Worldwide: Free shipping is available for Complete Headlights, Taillights, DRLs. For custom headlight retrofits, carbon fiber products, and performance products, there will be a shipping charge.  

Please note:
• For Retrofits, you are purchasing a headlight modification service.
• If you select 
"Shipping own headlights to BayOptiks for modification", you are required to send us your headlights.
• If you choose 
"Purchase new OEM headlights", we will order and modify a new OEM headlight for you.
• Once your customizations are complete, we will ship it to you!

Turnaround Time

  • Complete Headlights: 3-5 business days for order processing plus shipping time.
  • Custom Retrofits & Pre-Built Headlights: 6-8 weeks depending on the complexity and component availability.
  • New OEM and cores: 6-8 weeks plus an additional 4-8 weeks as these are special orders base on the vehicle VIN due to different versions (North American, European, etc.)
  • DRLs, Taillights, Brake Pads, and Carbon Fiber Aero: 3-5 business days for order processing, plus shipping time.
  • Lens Replacements: 1-2 weeks plus shipping time.

Please note, we do not have control over the time frames of our vendors, manufacturers, and delivery services as they may delay processes in regards to components and shipment. 

Recently Viewed

Testimonials

Jimmy Review

Jimmy

@dumpspec:
“I had to get a few parts installed from them and I'm very impressed with their team! Great attention to detail and I never had any problems with their install.”

Jonathan review

Jonathan

@thicwhips:
“For me personally these headlights are 100% worth the cost and the time that it takes to get them done. It completely changed and modernized the front end.”

Marcus

@kokpwr:
“They provide detailed step by step instructions that's easy to understand. Really appreciate the thoroughness.”

Wendell

@DJ_dub:
“Ordering was easy and the process was really simple. My RGB color changing DTM rings were perfect for my show car build and exactly what I needed.”

Her

@sirrealbuilds:
“The original OEM chromed out headlights just wasn't cutting it. The BayOptiks Vision retrofit completely changed my front end and I'm loving it.”

Jamie Review

Jamie

@smurf_f82:
“I had my OEM Ikon headlights custom blacked out with CSL Yellow DRLs and the outcome was exactly what I needed to complete my build.”