BMW F80 F82 F83 M3 M4 V Style Real Carbon Fiber LED Rear Bumper Diffuser with Side Extensions 2015-2019

BMW F80 F82 F83 M3 M4 V Style Real Carbon Fiber LED Rear Bumper Diffuser with Side Extensions 2015-2019

$599.95 In Stock In Stock Sold out
Select vehicle fitment
Notify when available

3-7 DAYS DELIVERY (NON PRE-ORDER)

100% ORIGINAL & HIGH-QUALITY

1-YEAR WARRANTY

Description

Upgrade the rear-end appearance of your BMW F80 M3 or F82/F83 M4 with this V Style Real Carbon Fiber LED Rear Bumper Diffuser Kit. Designed for 2015-2018 M3 Sedans and 2015-2019 M4 Coupe and Convertible models, this three-piece exterior upgrade features aggressive vortex shark fins, F1-style LED brake lights, and matching rear bumper corner extensions for a distinctive motorsport-inspired appearance.

Constructed from genuine lightweight carbon fiber, the diffuser and matching side extensions feature a premium 3K carbon fiber weave with a hard UV-protected clear-coated finish. The redesigned center diffuser incorporates pronounced aerodynamic fins and integrated LED strobe-style brake lighting, while the two carbon fiber corner extensions complete the rear lower bumper styling.

Designed as a replacement for the original center rear diffuser, the center section uses a direct clip-on installation with integrated mounting tabs. The left and right corner extensions attach using self-tapping screws. Installation requires drilling for the corner extensions and electrical wiring, including splicing and connecting the LED brake lights. Rear bumper removal is recommended, and professional installation is strongly advised.

Product Specifications

Vehicle Make BMW
Models M3 / M4
Chassis F80 / F82 / F83
Overall Fitment Years 2015-2019
F80 M3 Fitment 2015-2018
F82 / F83 M4 Fitment 2015-2019
Body Styles Sedan / Coupe / Convertible
Product Type Rear Bumper LED Diffuser and Corner Extension Kit
Design Style V Style Vortex Shark-Fin Design
Material Real Carbon Fiber
Carbon Fiber Weave 3K Weave Pattern
Color Black Carbon Fiber
Surface Finish Hard UV-Protected Clear Coat
Integrated Lighting F1-Style LED Strobe Brake Lights
LED Wiring Electrical Connection and Splicing Required
Center Diffuser Installation Direct Clip-On Replacement with Mounting Tabs
Corner Extension Installation Add-On with Self-Tapping Screws
Drilling Required Yes
Rear Bumper Removal Recommended
Mounting Hardware Included; Exact Fastener Breakdown Not Specified
Installation Instructions Not Included
Package Quantity 3 Pieces / 1 Complete Kit

Key Features

  • Designed for compatible 2015-2018 BMW F80 M3 and 2015-2019 F82/F83 M4 models
  • Aggressive V Style rear bumper diffuser with redesigned vortex shark fins
  • Integrated F1-style LED strobe brake lighting
  • Genuine lightweight carbon fiber construction
  • Premium 3K carbon fiber weave pattern
  • Hard UV-protected clear-coated finish
  • Matching left and right rear bumper corner extensions
  • Three-piece kit for coordinated rear-end styling
  • Center diffuser designed as a direct clip-on replacement
  • Corner extensions attach with self-tapping screws
  • Mounting hardware included
  • Drilling and electrical wiring required

Configuration Options

  • BMW F80 M3: Compatible 2015-2018 Sedan models.
  • BMW F82 M4: Compatible 2015-2019 Coupe models, including listed CS and GTS configurations where the original rear bumper mounting points match.
  • BMW F83 M4: Compatible 2015-2019 Convertible models.
  • Design: V Style three-piece rear diffuser with aggressive shark fins.
  • Material: Real 3K weave carbon fiber.
  • Finish: Hard UV-protected clear coat.
  • Lighting: Integrated F1-style LED brake lighting requiring wiring and splicing.

Package Includes

  • 1 x V Style Real Carbon Fiber Center Rear Bumper Diffuser with Integrated LED Brake Lights
  • 1 x Left Real Carbon Fiber Rear Bumper Corner Extension
  • 1 x Right Real Carbon Fiber Rear Bumper Corner Extension
  • Mounting hardware

Note: Designed for compatible 2015-2018 BMW F80 M3 Sedans and 2015-2019 BMW F82 M4 Coupes and F83 M4 Convertibles. The center diffuser replaces the original rear diffuser, while the two corner extensions attach to the surrounding rear bumper using self-tapping screws. Installation requires drilling and electrical wiring, including splicing and connecting the LED brake lights. The lighting is not a plug-and-play installation. Rear bumper removal is recommended for proper alignment. The exact fastener assortment is not specified, and installation instructions are not included. Verify factory rear bumper design, exhaust clearance, and local regulations concerning additional or flashing brake lights before ordering. Professional installation is strongly recommended. Test fitting is recommended before final installation.

Installation

  • Confirm compatibility with the BMW F80 M3 or F82/F83 M4 original rear bumper.
  • Inspect the factory center diffuser, corner areas, and mounting points.
  • Remove the original rear diffuser; rear bumper removal is recommended to improve installation access.
  • Test fit the V Style carbon fiber center diffuser against the factory bumper openings.
  • Align and install the center diffuser using its integrated clips and mounting tabs.
  • Position the left and right rear bumper corner extensions.
  • Mark the required screw mounting locations and carefully drill the necessary holes.
  • Secure the corner extensions using appropriate self-tapping screws and mounting hardware.
  • Route the integrated LED wiring away from exhaust heat and moving components.
  • Connect and splice the LED brake light wiring into the appropriate vehicle circuit using proper automotive electrical procedures.
  • Test LED operation and ensure that required factory lighting functions correctly.
  • Verify diffuser alignment, secure mounting, exhaust clearance, and rear bumper fitment.
  • Professional installation is strongly recommended.
  • Test fitting is recommended before final installation.

Fitment

  • 2015-2018 BMW F80 M3 Sedan
  • 2015-2019 BMW F82 M4 Coupe
  • 2015-2019 BMW F83 M4 Convertible
  • Selected BMW F82 M4 CS and GTS configurations listed in the compatibility table, subject to original bumper matching
  • Designed for compatible factory M3/M4 rear bumper mounting configurations
  • Not listed for standard BMW F30 3 Series or F32/F33 4 Series models
  • Verify factory diffuser design, mounting locations, LED wiring requirements, and exhaust clearance before ordering

Shipping Policy

United States: Free shipping available to the lower 48 states across all items. Other states will incur a shipping charge.

Worldwide: Free shipping is available for Complete Headlights, Taillights, DRLs. For custom headlight retrofits, carbon fiber products, and performance products, there will be a shipping charge.  

Please note:
• For Retrofits, you are purchasing a headlight modification service.
• If you select 
"Shipping own headlights to BayOptiks for modification", you are required to send us your headlights.
• If you choose 
"Purchase new OEM headlights", we will order and modify a new OEM headlight for you.
• Once your customizations are complete, we will ship it to you!

Turnaround Time

  • Complete Headlights: 3-5 business days for order processing plus shipping time.
  • Custom Retrofits & Pre-Built Headlights: 6-8 weeks depending on the complexity and component availability.
  • New OEM and cores: 6-8 weeks plus an additional 4-8 weeks as these are special orders base on the vehicle VIN due to different versions (North American, European, etc.)
  • DRLs, Taillights, Brake Pads, and Carbon Fiber Aero: 3-5 business days for order processing, plus shipping time.
  • Lens Replacements: 1-2 weeks plus shipping time.

Please note, we do not have control over the time frames of our vendors, manufacturers, and delivery services as they may delay processes in regards to components and shipment. 

Recently Viewed

Testimonials

Jimmy Review

Jimmy

@dumpspec:
“I had to get a few parts installed from them and I'm very impressed with their team! Great attention to detail and I never had any problems with their install.”

Jonathan review

Jonathan

@thicwhips:
“For me personally these headlights are 100% worth the cost and the time that it takes to get them done. It completely changed and modernized the front end.”

Marcus

@kokpwr:
“They provide detailed step by step instructions that's easy to understand. Really appreciate the thoroughness.”

Wendell

@DJ_dub:
“Ordering was easy and the process was really simple. My RGB color changing DTM rings were perfect for my show car build and exactly what I needed.”

Her

@sirrealbuilds:
“The original OEM chromed out headlights just wasn't cutting it. The BayOptiks Vision retrofit completely changed my front end and I'm loving it.”

Jamie Review

Jamie

@smurf_f82:
“I had my OEM Ikon headlights custom blacked out with CSL Yellow DRLs and the outcome was exactly what I needed to complete my build.”